Please use this identifier to cite or link to this item: https://dspace.univ-ouargla.dz/jspui/handle/123456789/24009
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorDEKMOUCHE, Messaouda-
dc.contributor.advisorZENKHRI, Louiza-
dc.contributor.authorBELKESSOUR, Amina-
dc.contributor.authorDJAMAI, Nesrine-
dc.date.accessioned2020-11-03T10:25:38Z-
dc.date.available2020-11-03T10:25:38Z-
dc.date.issued2020-
dc.identifier.urihttp://dspace.univ-ouargla.dz/jspui/handle/123456789/24009-
dc.descriptionchimie analytique-
dc.description.abstractLe thème entrepris dans ce projet dufin d’étude propose de déterminer certains paramètres inter faciale (métal/électrolyte) passé au niveau de l’électrodede travail parla méthode de SIE L’objectif principalde l’étudeque c’étaitprévu de faire est demettre en évidence l’épaisseurde la couche adsorbée sur les trois électrodes de travail utilisée (Aluminium ; cuivre; acier xc52) par la méthode de spectroscopie d impédances électrochimiqueMais malheureusement et à cause du Corona viruson n’a pas pu se déplacer vers laboratoire de valorisation et technologie des ressources sahariennes de la faculté des sciences et de la technologie de l’université d’El Oued pourles réaliser, alors on a choisis de présenter comme un exemplel’expérimentaleset les résultatsde deux études ressemblantesen_US
dc.description.abstractThe theme of this end of study project proposes to determine certain inter-facial parameters in the working electrodes by the impedance spectroscopy method. The main objective of the study that we planned to do is to highlight the thickness of the adsorbed layer in the three working electrodes used (Aluminum; copper; steel xc52) with the impedance spectroscopy method. However, unfortunately and because of the Corona virus we were not able to go to the Saharan resources development and technology laboratory of the Faculty of Science and Technology of the University of El Oued to carry them out, so we chose to present as an example the experimental and the results of two similar studies-
dc.description.abstractالموضوع المتناول في العمل الذي كنا بصدد تنفيذه وعمله في مشروع نهاية الدراسة هو تحديد المعامالت الحاصلة على مستوى الكترود العمل باستعمال طريقة مطيافية الممانعة االلكتروكيميائية. الهدف الرئيسي لهذه الدراسة كان هو تحديد سمك الطبقة الممتزة على سطح الكترودات العمل المستعملة )الفوالذ xc52 ; النحاس ;االلمنيوم ( بمطيافية الممانعة . لكن لألسف وبسبب فيروس كورونا لم نتمكن من التوجه إلى معمل تنمية الموارد والتقنية الصحراوية بكلية العلوم والتكنولوجيا بجامعة الواد لتنفيذها، لذلك اخترنا تقديم كمثال العمل التجريبي لدراستين تشابه العمل المتناول في حدود المعقول-
dc.language.isofren_US
dc.publisherUniversité de Kasdi Merbah-Ouargla-
dc.subjectspectroscopie d’impédance électrochimiqueen_US
dc.subjectla double coucheen_US
dc.subjectl’épaisseuren_US
dc.subjectMilieu acideen_US
dc.titleL’étude théorique de déterminer l’épaisseur de la double couche d’une électrode dans un milieu acideen_US
dc.typeThesisen_US
Appears in Collections:Département de chimie - Master

Files in This Item:
File Description SizeFormat 
BELKESSOUR-DJAMAI.pdf2,26 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.