Please use this identifier to cite or link to this item: https://dspace.univ-ouargla.dz/jspui/handle/123456789/16331
Title: Etude de la composante – dalle de béton en compression – dans les nœuds d’ossatures mixtes soumis à des moments de flexion positifs
Authors: A. Beroual
A. Kriker
Bennacer, Mohamed Akram
Issue Date: 2017
Series/Report no.: ;2017
Abstract: Les codes et les normes modernes tels que (Eurocode 4, 2004) concernent la caractérisation des joints mixtes acier-béton dans les constructions, principalement sous moments de flexion négatif. Cependant, lorsque la structure mixte est soumise à une sollicitation / événement exceptionnel tel que le séisme ou de la perte de la colonne, le joint poutre colonne peut être soumis à un moment de flexion positif (sagging moment), une situation de chargement qui n’est pas encore couverte par les codes. Cette thèse s’intéresse au comportement des joints mixtes externes poutre-colonne sous l’effet de moments de flexion positifs, principalement la composante '' dalle de béton en compression ''. En effet, si référence est faite aux Eurocodes , la méthode recommandée pour caractériser les joints de structure est la méthode des composantes et la composante «dalle de béton en compression' ' a été identifié comme étant le composant oubliée pour être en mesure d'application pour cette méthode aux joints mixtes soumis à un moment de flexion positif. Dans cette thèse, la méthode des éléments finis est utilisée pour modéliser la dalle en utilisant le logiciel VECTOR 2. Le comportement de la dalle est étudié en détail à travers des simulations numériques, et un modèle analytique est proposé. Avec ce dernier, il est possible de caractériser la dalle de béton parmi les composantes de compression, et à appliquer la méthode des composantes pour prédire les propriétés mécaniques des joints composites soumis à un moment de flexion positif.
القوانين والمعايير الحديثة مثل (الدليل الأوربي 4، 2004) بشأن دراسة البنى الحديدية المركبة خرسانة – هيكل حديدي في البناء المنشئات، وخاصة تحت تأثير العزوم السلبية. غيرانه ، عندما تتعرض الهيكل المركبة لزلزال أو حادث مثل خسارة عمود ، فانه يكون تحت تأثير عزوم الانحناء الموجبة ،و هي حالة التحميل التي لا يغطيها الدليل الأوربي 4. تتناول هذه الأطروحة سلوك المفاصل المركبةالطرفية من المبنى عمود حديدي – رافدة مركبة تحت تأثير عزوم الانحناء الموجبة ، في المقام الأول على العنصر أو المركبة '' البلاطة الخرسانية تحت الضغط ''. في الواقع، وأخذا بعين الاعتبار الدليلالأوربي،فالطريقة المعتمدة لدراسة المفاصل الهيكلية هي أسلوب المركبات و المركبة "ضغط البلاطة الخرسانية '' تم تحديدها على أنها المركبة المنسية حتى نكون قادرين على دراسة المفاصل المركبة التي تخضع لعزوم الانحناء الموجبة. في هذه الأطروحة، يتم استخدام طريقة العناصر المنتهية باستخدام برنامج VECTOR2. أجريت من خلال المحاكاة الرقمية، ودراسة سلوك البلاطة بالتفاصيل مع اقتراح نموذج تحليلي. مع النموذج المقترح، فمن الممكن تشخيص المركبة: بلاطة خرسانية تحتالضغط وتطبيق طريقة المركباتللتنبؤ بالخواص الميكانيكية للمفاصل المركبةالتي تخضع لعزوم الانحناء الموجبة
Modern codes and standards such as (Eurocode 4, 2004) , deal with the steel–concrete composite joints concerning the characterization of steel-concrete composite joints in construction structuresmainly under negative bending moments. However, when the composite structure is subjected to an exceptional accident / event such as an earthquake or the loss of the column, the beam joint to the column may be subjected to a sagging moment, A loading situation that is not yet covered by the codes. This thesis deals with the behavior of the outer beam-column composite joints under the effect of positive bending moments, principally the component '' concrete slab in compression ''. Indeed, if reference is made to the Eurocodes, the recommended method for characterizing the structural joints is the method of the components and the component "concrete slab in compression" has been identified as the forgotten component to be able to use this method to composite joints subjected to a positive bending moment. In this thesis, the finite element method is used to model the slab using the VECTOR 2 software. Conducted through numerical simulations, the behavior of the slab is studied in detail and an analytical model is proposed. With the proposed model it is possible to characterize the concrete slab in the compression components and to apply the component method to predict the mechanical properties of composite joints subjected to a positive bending moment.
URI: http://dspace.univ-ouargla.dz/jspui/handle/123456789/16331
ISSN: kr
Appears in Collections:Département de Hydraulique et Génie Civil - Doctorat

Files in This Item:
File Description SizeFormat 
Mohamed-Akram-Bennacer.pdf10,93 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.