Please use this identifier to cite or link to this item:
https://dspace.univ-ouargla.dz/jspui/handle/123456789/33693
Title: | Optimisation parsimulation d’une cellule solaire encouchesminces à base de Sb2(Se1-xSx)3 |
Authors: | BENMIR Abdelkader BELKHAMSA, Madjed BETTAYEB, Bachir |
Issue Date: | 2023 |
Publisher: | Université KASDI-MERBAH Ouargla |
Abstract: | L'objectif de ce travail est d'effectuer une optimisation par simulation à l'aide du logiciel SCAPS de l'épaisseur d, de la composition Y et de la densité des atomes dopants Na de la couche absorbeur pour une cellule photovoltaïque en couches minces à base de Sb2(Se1-xSx)3. On trouvé que la valeur optimale de l'épaisseur d est 0.3 µm. Cependant, la composition optimale Y était le plus faible, ce qui correspond à un gapminimalEg = 1.18 eV.Alors que la concentration en atomes dopants Na ne dépasse pas 1016 cm -3. Il a été constaté que toutes ces valeurs optimales donnent un rendement maximal η = 13.58 %. The objective of this work is to perform an optimization by simulation using the SCAPS software of the thickness d, the composition Y and the density of the doping atoms Na of the absorber layer in a Sb2(Se1-xSx)3 thin-film photovoltaic cell. It can be seen that the optimal value of the thickness d is 0.3μm. However, the optimal composition Y was the lowest, which corresponds to a minimum gap Eg = 1.18 eV. While the concentration of Na dopant atoms does not exceed 1016 cm -3. It was found that all these optimal values give the maximum efficiency η = 13.58%. |
Description: | Electrotechnique Industrielle |
URI: | https://dspace.univ-ouargla.dz/jspui/handle/123456789/33693 |
Appears in Collections: | Département de Génie électrique - Master |
Files in This Item:
File | Description | Size | Format | |
---|---|---|---|---|
BELKHAMSA et BETTAYEB.pdf | 2,08 MB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.