Please use this identifier to cite or link to this item: https://dspace.univ-ouargla.dz/jspui/handle/123456789/41987
Full metadata record
DC FieldValueLanguage
dc.contributor.advisorKHODJA, Sebti-
dc.contributor.authorSACI AYACHI, AMOR-
dc.date.accessioned2026-11-08T09:54:23Z-
dc.date.available2026-11-08T09:54:23Z-
dc.date.issued2024-
dc.identifier.urihttps://dspace.univ-ouargla.dz/jspui/handle/123456789/41987-
dc.descriptionMaterial physicsen_US
dc.description.abstractTitanium dioxide (TiO2) thin films were successfully fabricated on three different substrates (glass, quartz and silicon (Si(100)) at room temperature with a deposition time of 90 min using the RF magnetron sputtering technique. The thin TiO2 films are then air annealed at 400 °C for one hour and the effect of the substrate type on the microstructure, morphology, surface topography, transmission and optical band gap of these films was studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), UV-Visible (UV-Vis) spectrophotometry. XRD analysis showed that all thin films are polycrystalline and only crystallize in the anatase tetragonal structure of TiO2 with a preferred orientation along the (101) plane. Crystallinity, peak intensity and crystallite growth were found to be dependent on substrate type. The observed peaks confirmed the presence of anatase phase in all samples with XRD data. SEM images showed that TiO2 thin films have different surface topography, which seems to be influenced by substrate type, expressed as average grain size. Transmission spectra demonstrated that the TiO2 thin film grown on quartz had a higher average transmission in the visible range than that deposited on a glass substrateen_US
dc.description.abstractDes films minces de dioxyde de titane (TiO2) ont été fabriqués avec succès sur trois substrats différents (verre, quartz et silicium (Si(100)) à température ambiante avec un temps de dépôt de 90 minutes en utilisant la technique de pulvérisation magnétron RF. Les films minces de TiO2 sont ensuite recuits à l'air à 400 °C pendant une heure et l'effet du type de substrat sur la microstructure, la morphologie, la topographie de la surface, la transmission et la bande interdite optique de ces films a été étudié par diffraction des rayons X (DRX), microscopie électronique à balayage (MEB), spectrophotométrie UV-Visible (UV-Vis). L'analyse XRD a montré que tous les films minces sont polycristallins et cristallisent uniquement dans la structure tétragonale anatase du TiO2 avec une orientation préférée le long du plan (101). La cristallinité, l’intensité maximale et la croissance des cristallites dépendent du type de substrat. Les pics observés ont confirmé la présence de phase anatase dans tous les échantillons contenant des données XRD. Les images SEM ont montré que les films minces de TiO2 ont une topographie de surface différente, qui semble être influencée par le type de substrat, exprimé en taille moyenne des grains. Les spectres de transmission ont démontré que le film mince de TiO2 développé sur du quartz avait une transmission moyenne plus élevée dans le domaine visible que celui déposé sur un substrat de verre-
dc.language.isoenen_US
dc.publisherKASDI MERBAH UNIVERSITY -OUARGLAen_US
dc.subjectRF sputteringen_US
dc.subjectSubstrate typeen_US
dc.subjectTiO2 thin filmsen_US
dc.subjectOptoelectronic applicationsen_US
dc.titleEffect of the nature of the substrate on the structural and optical properties of TiO2 thin films for optoelectronic applicationsen_US
dc.typeThesisen_US
Appears in Collections:département de physique - Master

Files in This Item:
File Description SizeFormat 
_Saci_Khodja.pdf2,07 MBAdobe PDFView/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.